I am in the process of installing my motor and tranny and trying to level everything out. it looks like I will need to put a spacer to get the transmission up more. I've currently left a 1/2 to 3/8 inch under the pan to the Volaire crossmember. Question is do I put the spacer under the bracket and the frame or try to space the mount with a spacer? If I dont space it the motor will be out 3/4" from the front of the valve cover to the rear. Thanks for looking and have a great day!
56F100 460 C6 install
2 posts
• Page 1 of 1
56F100 460 C6 install
by bjpearson » Wed Mar 24, 2010 1:44 am
I am in the process of installing my motor and tranny and trying to level everything out. it looks like I will need to put a spacer to get the transmission up more. I've currently left a 1/2 to 3/8 inch under the pan to the Volaire crossmember. Question is do I put the spacer under the bracket and the frame or try to space the mount with a spacer? If I dont space it the motor will be out 3/4" from the front of the valve cover to the rear. Thanks for looking and have a great day!- bjpearson
- Newbie
- Posts: 2
- Joined: Thu Jan 21, 2010 6:38 pm
Re: 56F100 460 C6 install
by midfifty_jesse » Fri Mar 26, 2010 10:22 pm
Hi BJ,
I asked my boss about your question, and this is what she had to say, "the spacer should be between the mount and the frame, keeps the integrity of the mount, frame and trans and does not fool with any possible messing up at the trans casting."
Hope this helps!
I asked my boss about your question, and this is what she had to say, "the spacer should be between the mount and the frame, keeps the integrity of the mount, frame and trans and does not fool with any possible messing up at the trans casting."
Hope this helps!
-
midfifty_jesse - Global Moderator
- Posts: 15
- Joined: Fri Oct 17, 2008 4:53 pm
- Location: Mid Fifty
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest